Install windows 10 from USB
Currently, individuals are opting to download Windows onto USB drives instead of CD, As a result, people are seeking out programs that can perform this task. There are various programs available to do so; however, some of these programs require more intricate preparation. As demand for this service increases, there has been a growing need for programs that can burn multiple versions of Windows onto a single flash drive, which has also led to the introduction of several new programs.
Ventoy bootable USB
This program stands out from others due to its simple process for preparing a Windows burning setup. It is likely the most effortless program available for this task, with the ability to burn multiple Windows versions onto a single flash drive. Here is how to use it. Instead of repeatedly formatting the disk, simply transfer the ISO file onto the USB drive and execute it. Ventoy allows for multiple ISO files to be copied at once and presents a boot menu for selection, accommodating both Legacy BIOS and UEFI in equal measure.
Explanation, burn more than one version of Windows, different, on one flash drive, XP, 7, 8, 8.1, 10
You do not need, to format the disk, again and again, just copy the ISO file, to the USB drive, and run it, you can copy several ISO files, simultaneously, and Ventoy will give you, a boot menu to choose, both Legacy ,BIOS and UEFI are supported, in the same way, also supports 32 - 64 bit.
Configure the flash memory
In this step, we will work to configure the flash, and that, through the following steps, connect the flash memory with the computer.
- Click on the flash drive, right-click the mouse.
- Next, click on Format, then Start.
- Thus, you have been able to configure the flash drive, in simple and easy steps.
Ventoy program, to burn Windows on the flash drive
- 100% Open Source
- Easy-to-use software
- Fast in copying Windows files, on the flash drive
- Support for MBR , GPT systems
- Support automatic installation of Windows
How do I know, whether my disk, works with, MBR or GPT?
To find out the type of disk storage (MBR or GPT), follow these steps.
- Click on the Windows tab, on the keyboard + the letter R.
- The command window will pop up on the surface, run
- Type the following command, diskmgmt.msc, and press Enter
- On the new page, Disk Management
- Right click on the word Disk 0, then choose Properties
- In the new window, select Volumes
- Next to the word, split pattern, next to the word, Master Boat, Record Plug or Master Boat Record Gate
Ventoy program list explanation
The list of ventoy programs will be explained, to get acquainted, the features of the program.
- No. 1, select the language
- No. 2, Program Options
- No. 3, Secure Boot, This option is used to install Windows 11, even if it does not support the capabilities of your device, Windows 11
- No. 4, partitioning method, choose what suits your device, MBR or GPT
- No. 5, Configure Partition Selected, NTFS
- No. 6, remove the Ventwe program, from the flash, and how to do that, put the flash drive in the computer, then run the Ventoy program, then in the flash box choose it, then in the program options menu, choose Remove Ventoy, a message will appear to remove the program from the flash, and format it, choose Yes, note that any data will be lost on it
- No. 7, View all connected devices, computer
- No. 8, Create VTSI File
- No. 9, Flash Configuration Installation
Steps to burn more than Windows, on one flash drive
- Download the program, from the official website.
- Support 32, 64-bit, depending on your Windows system
- Put the flash drive in your computer, desktop or laptop
- Run the program, then choose the partitioning method, MBR or GPT, from the program menu, as we explained earlier
- Then click on, install the program on the flash, you will be asked to configure the flash drive
- The program will start initializing the flash
- The program will start installing, on the flash, wait until it is finished
- After the installation is finished, copy, the Windows version, to burn, which should be, in ISO format
- Open the flash, and you paste Windows, in the flash drive
- When you finish, the process of pasting Windows into the flash drive, now Windows has been burned successfully
- You can duplicate, copy any other copy of Windows, on the same flash drive.
- The program is completely free
Take-off method, from ventoy flash drive
To ensure that the hard drive, in the correct order of the boot stage, we have to follow the steps below.
- First, restart your computer.
- At the start of the computer, click Delete, F12, or F9
- In the next step, we enter the Boot, then modify some options to the following options
- First boot USB
- Hard Drive Boot II
- Now press F10 to save, then OK, the computer will restart
- When the ventoy interface appears, after restarting the computer, a Ventoy program menu will appear, choose from it the version to be installed, then click Enter, to start the installation
- Note, you can burn Windows XP , 7 , 8 , 8.1 , 10 together
- Note, very important, during the installation process for Windows, after downloading the program for the files on the hard drive, and when you restart the computer, the program interface appears again, and the installation of Windows does not start, all you have to remove, the flash drive from the computer, and restart the computer again, and the installation process will start automatically.